HP-PC Edition

Post Reply
JohnGriffiths
Reactions:
Posts: 25
Joined: Sat May 13, 2017 11:39 am

HP-PC Edition

Post by JohnGriffiths » Sun Jun 25, 2017 4:31 am

Software creator: dabone / Freddy P

Download
http://www.arcadepunks.com/official-hyp ... thyperpie/
This is a base system with no roms.

Setup
You need to create a H drive. Either create a new partition, or change the drive letter of your external drive (easiest).
Windows 7 how to: https://www.youtube.com/watch?v=C-dTlXSKr7g
Windows 10 how to: https://www.youtube.com/watch?v=TsivHL0IcHg
Extract the rars (use 7zip) to the root H directory so all the files are extracted and paths are

Once Extracted you are basically ready to play…all you need are games and media. there are two methods to acomplish this.

The first option: Connect your Pi to you Home network, gain access to your rom folder, place all the system rom folders you wantfrom Hyperpie on yopur Pi and drag and drop them to H:\HyperPC\Roms\
If you have a .img file of your image, or you do not have a pi but you have an image that follows Hyperpie or Motion Blue Rom Naming Standards,(you will need to download and extract the hyperpie image if you dont have one) you can use 7.Zip to open the img and move the folders over. just right clickthe .img file, and open archive, then open the .img file it shows, it will open to the file system. Now navigate to home\pi\RetroPie\roms and move the system rom folders over one at a time to H:\HyperPC\Roms

Navigate to H:\HyperPC\RocketLauncher\Media\Fonts and install the BebasNeue.ttf font

If you are using an XBOX 360 controller and all your drivers, direct x, and runtimes are up to date you are now ready to play by opening the attract.exe shortcut. *If you run into errors, or you are unsure you have all the right drivers, navigate to H:\HyperPC\Utilities. From here run the DXSETUP.exe shortcut, and all the Vcredist_64.exe files.This should take care of all emulator issues
NOT USING AN XBOX 360 CONTROLLER!?!?!

Ok, not everyone is gonna use a 360 controller, so I have included drivers for ps3 and ps4 usb\bluetooth controllers. In testing, once the drivers were installed from the Utilities folderthe controllers worked for everything, just like the 360 pad, with no issues at all. Anything else may need to be mapped in the emulators themselves. Navigate to H:\HyperPC\Emulators andmap your controller in each emulator if they do not work.

NOTES
“mame” folder is for the current MAME romset and CHD’s- MAME will need EVERY CONTROLLER TO BE MAPPED BY PRESSING “TAB” ON THE FIRST GAME YOU BOOT INTO. This is even true for XBOX 360 Controllers
Will’s Arcade Romset will work with our setup, place them in an “arcade” folder inside the Roms folder, however the current set does have some bad roms, and you will see a few roms crash. This is being addressed in a new set, and we will have an update when it is released. But 95% of the roms will work just like on the pi!
Windows 10 users: Attract Mode has a bug where it shows the taskbar, your best bet is to right click it and hide the taskbar until this is fixed.

The first time you run Kodi, it may hide behind attract mode until you press a key.

Commodore 64 is not setup to work yet.

BIOS's
Naomi, naomi 2, gaelco, atomiswave, and hikaru are all handled by demul. put all roms and bios’ in the
“demul” folder (H:\HyperPC\Roms\demul). Use the latest demul 0.7a roms.
BIOSes needed: gameboy advance, sega CD, PC Engine\Turbografx CD, PC-FX, psx, and dreamcast all go in the folder H:\HyperPC\Emulators\Retroarch\system\
3do bios goes in H:\HyperPC\Emulators\4DO\
PS2 bios goes in H:\HyperPC\Emulators\PCSX2 1.4.0\bios

User avatar
xbox1234
Reactions:
Posts: 6
Joined: Fri Apr 14, 2017 11:43 pm

Re: HP-PC Edition

Post by xbox1234 » Thu Jul 13, 2017 12:10 pm

Any idea why its stuck at 66%?
Last edited by xbox1234 on Mon Jul 31, 2017 10:54 am, edited 1 time in total.

JohnGriffiths
Reactions:
Posts: 25
Joined: Sat May 13, 2017 11:39 am

Re: HP-PC Edition

Post by JohnGriffiths » Mon Jul 31, 2017 8:47 am

Hopefully you eventually downloaded and have got it working.
Sorry for the no reply.

User avatar
xbox1234
Reactions:
Posts: 6
Joined: Fri Apr 14, 2017 11:43 pm

Re: HP-PC Edition

Post by xbox1234 » Mon Jul 31, 2017 10:56 am

Hi John! I fugure it out. There seems to be a problem when using Azureuz/Vuze. QbitTorr works fine!

pudge6988
Reactions:
Posts: 17
Joined: Thu Mar 30, 2017 9:14 pm

Re: HP-PC Edition

Post by pudge6988 » Thu Aug 17, 2017 9:01 pm

Are the attract mode game lists based on full romsets?

User avatar
Korkapotomis
Reactions:
Posts: 233
Joined: Sun Dec 11, 2016 8:55 pm

Re: HP-PC Edition

Post by Korkapotomis » Sat Aug 19, 2017 2:36 am

pudge6988 wrote:
Thu Aug 17, 2017 9:01 pm
Are the attract mode game lists based on full romsets?
Yes all lists are

Post Reply